i and ix series II

5kVA – 15kVA AC/DC power source with a high performance power analyzer


The iX Series II represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments.

The sleek integrated approach of the iX Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rack mountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated. Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.

  • 5.000 VA to 15.000 VA of AC and DC Output Power
  • Combines AC/DC power source and power analyzer
  • Harmonic analysis of Voltage and Current
  • Programmable Impedance
  • AC, DC and AC+DC Output Modes
  • Multiple Chassis Configurations
  • Powerful output transient generation
  • High Crest Factor Capability
  • Arbitrary waveform generation
  • Constant Power Mode
  • Meets IEC 61000-3-2 and IEC 61000-3-3 Source requirements
Model Power Phases #Cabinets Output Voltage Frequency Range
ix II Series AC/DC Power Sources with enhanced controller  (AC, DC or AC+DC output)
5001iX-400R 5 kVA 1 1 150/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
10001iX-400R 10 kVA 1 2 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
10002iX-400R 10 kVA 2 2 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
15001iX-400R 15 kVA 1 3 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
15003iX-400R 15 kVA 3 3 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
i II Series AC/DC Power Sources with basic controller (AC or DC output)
5001i-400R 5 kVA 1 1 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
10001i-400R 10 kVa 1 2 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
DC, 16 – 1000 Hz
10002i-400R 10 kVA 2 2 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
15001i-400R 15 kVA 1 3 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz
15003i-400R 15 kVA 3 3 50/300 Vac
200/400 Vdc
DC, 16 – 1000 Hz

Instrument Control Software

Windows® Instrument Control Software is provided with the iX and i Series II. This software provides easy access to the power sources capabilities without the need to develop any custom code.

The following functions are available through this GUI program:

  • Steady state output control (all parameters)
  • Create, run, save, reload and print transient programs
  • Generate and save harmonic waveforms [iX only]
  • Generate and save arbitrary waveforms [iX only]
  • Download data from a digital storage oscilloscope [iX only]
  • Measure and log standard measurements
  • Capture and display output voltage and current waveforms [iX only]
  • Measure, display, print and log harmonic voltage and current measurements [iX only]
  • Run IEC61000-4-11, IEC61000-4-14 and IEC61000-4-28 test programs
  • Display IEEE-488 or RS232C bus traffic to and from the AC Source to help you develop your own test programs.