Tekbox

Pre-compliant EMC test equipment and accessories


Tekbox is a supplier of affordable test equipment and accessories for pre-compliant EMI/EMC testing including Near Field Probe Sets, Pre-amplifier and driver amplifiers, Open TEM cells, LISN’s, EMC software etc. The tekbox products fit well with the Rigol DSA800 series spectrum analyzers for pre-compliant EMC measurements.

TBLC08
5O µH AC Line Impedance Stabilisation Network
9 kHz – 30 MHz according to CISPR16, 240 Vac, 8 A
TBOH01
5µ H DC Line Impedance Stabilisation Network
100 kHz – 110 MHz (1 GHz), 0-60 Vdc, 10 A according CISPR25
New TBLM1 LISN Mate
Line Impedance Stabilisation Network Mate
30 kHz – 100 MHz
Separates Common Mode and Differential Mode noise
 
 
New TBOH01 Set
2 x TBOH01 5 µH DC LISN (CISPR25), Coax cable BNC(M) to N(M), 50 Ohm Load
New DC LISN Combo
2 x TBOH01 5 µH DC LISN (CISPR 25), TBLM1 LISN Mate, 2 Coax cable BNC(M) to BNC(M), 1 x Coax cable BNC(M) to N(M), 50 Ohm Load
 
 
TBPS01
EMC Near Field Probe Set
TBPS01-TBWA2/20dB
EMC Near-field Probe Set +
20 dB Wideband Amplifier in wooden box
TBPS01-TBWA2/40dB
EMC Near-field Probe Set +
40 dB Wideband Amplifier in wooden box
Set 1
TBPS01 EMC Near Field Probe Set
TBWA2/20dB 20 dB Wideband Amplifier
in wooden box +
TBMDA1 Modulated Wideband Driver Amplifier
Set 2
TBPS01 EMC Near Field Probe Set
TBWA2/40dB 40 dB Wideband Amplifier
in Wooden box +
TBMDA1 Modulated Wideband Driver Amplifier
TBWA2/20dB
Wideband (EMC Probe) Amplifier
1.5 MHz – 6 GHz, Gain 20 dB, NF 4.5 dB
TBWA2/40dB
Wideband (EMC Probe) Amplifier
2.5 MHz – 6 GHz, Gain 40 dB, NF 4.5 dB
Wideband (EMC Probe) Amplifier set
TBWA2/20dB + TBWA/40dB
TBDA1/14dB
Wideband Driver Amplifier
25 MHz – 3 GHz, 14 dB gain, +22 dBm P1dB
TBDA1/28dB
Wideband Driver Amplifier
25 MHz – 3 GHz, 28 dB gain, +22 dBm P1dB
Wideband Amplifier Set
TBWA2/20dB +  TBWA/40dB Pre-Amplifiers
TBDA1/14 + TBDA1/28 Driver Amplifiers
 
TBHDR1
High Dynamic Range EMC Pre-Amplifier
30 kHz – 1.5 GHz (6 GHz)
Gain up to 24 dB, 19 dBm typ P 1dB, 2.7 dB NF
TBMDA1
Modulated Wideband Driver Amplifier
25 MHz-3 GHz, gain up to 25 dB, 22 dBm P1dB
CW, 1 kHz 80% AM, 1 kHz 50% pulse, 217 Hz 12.5%
New TBMDA2
Modulated Wideband Driver Amplifier
10 MHz-1.5 GHz, Gain up to 46.7 dB, up to +27 dBm P1dB
CW, 1 kHz 80% AM, 1 kHz 50% pulse, 217 Hz 12.5%
New TBMDA3
Modulated Power Amplifier
10 MHz – 1 GHz, Gain up to 44.7 dB, Up to +37 dBm P1dB (5 Watt)
CW, 1 kHz 80% AM, 1 kHz 50% pulse, 217 Hz 12.5%
110 – 240 Vac
New TBMDA4
Modulated Power Amplifier
100 kHz – 50 MHz, Gain up to 49.9 dB, Up to +37 dBm P1dB (5 Watt)
CW, 1 kHz 80% AM, 1 kHz 50% pulse, 217 Hz 12.5%
110 – 240 Vac
New TBLPA1
Linear Wideband Power Amplifier
10 MHz – 1 GHz, Up to 1 Watt
TBTC0
Open TEM Cell, 28 mm Septum
TBTC1
Open TEM Cell, 50 mm Septum
TBTC2
Open TEM Cell, 100 mm Septum
TBTC3
Open TEM Cell, 150 mm Septum
Set 1
TBTC1,Open TEM Cell with 50 mm Septum
TBMDA1 Modulated Wideband Driver Amplifier
EMCview
PC software for EMC pre-compliance testing
TBAS1
N type RF Attenuator Set
DC-3 GHz, 2 Watt, 3, 6, 10, 20 dB
TBAS2
SMA type RF Attenuator / Termination Set
DC-6 GHz, 1 Watt, 3, 6, 10, 15, 20, 30 dB
& 2 pcs 50 Ohm terminations
TBCAS1
Coaxial Adapter Set
44 pcs of most common coaxial adapters
     
TBAS3
10 Watt RF Attenuator Set
DC – 3 GHz, 10 Watt, 3, 6, 10, 20 dB
 TBFL1
Transient Limiter
9 kHz – 600 MHz
New TBST120/60/60/2
Shielded Tent 120 cm x 60 cm x 60 cm
Filter Panel with 10 A AC Mains and 2 x 10 A DC Filters, 3 x N and 1 x BNC, ~ 40-50 dB shielding from DC to 1.5 GHz
Fits up to TBTC3 Open TEM cell
   
New TBST86/49/45/1
Shielded Tent 86 x 49 x 45 cm
Filter Panel with 10 A AC Mains and 2 x 10 A DC Filters,3 x N and 1 x BNC, ~ 40-50 dB shielding DC to 1.5 GHz
Fits up to TBTC2 Open TEM cell
New TBST86/49/45/2
Shielded Tent 86  x 49 x 45 cm
Filter Panel with 2 x 10 A DC Filters, 3 x N and 1 x BNC,~ 40-50 dB shielding DC to 1.5 GHz
Fits up to TBTC2 Open TEM cell
New TBSB-105/60 &  TBSB-70/40
Shielded Bag 105 x 60 cm or 70 x 40 cm
~ 50 dB shielding in the range DC to 2 GHz
TBST-105/60 Fits up to TBTC2
TBST-70/40 Fits upo to TBTC1
   
TBCG1
Radiating Comb Generator
100 MHz Base Frequency, 30 MHz  -6 GHz
TBCG2
Comb Generator/Frequency Multiplier
Input Frequency: 1 MHz – 350 MHz
Comb spectrum: 1 MHz – 2.5 GHz
TBCP1 150
RF Current Monitoring Probe
10 kHz – 150 MHz
25 mm Aperture
Transfer impedance: -6 to 18 dBΩ
 

 
New TBCP1-200
RF Current Monitoring Probe
10 kHz – 500 MHz
25 mm Aperture
Transfer impedance: 3 to 17 dBΩ
New TBCP1-250
RF Current Monitoring Probe
30 kHz – 250 MHz,
25 mm Aperture
Transfer impedance: 0 to 18 dBΩ